Part 2724000

C3000 Pump

C24000 Pump

Drive Design

Direct drive stepper motor/leadscrew with 30

mm of travel. Manually moveable for power

off syringe removal. Proprietary

maintenance-free design.

Direct drive stepper motor/leadscrew with 30

mm of travel. Proprietary maintenance-free

design.

Stroke Speed

1.2 seconds to 100 minutes per stroke

(800 minutes in microstep mode).

4.2 seconds to 800 minutes per stroke

(3200 minutes in microstep mode).

Step Resolution

Standard mode 3,000 steps,

Hi-Res mode 24,000 steps

Standard mode 24,000 steps,

Hi-Res mode 192,000 steps

Part Number

2703000

Power requirements:

Supply voltage:

24VDC 10%

Currents:

Max.1.5A

Plunger drive:

Principle:

Quad encoder for loss of steps, detection of loss steps with error message

Travel:

30mm

Plunger speed:

1.2 sec. - 20 min./full stroke (speed ranges vary depending on syringe size and tubing)

Syringes:

Type:

XP: 50µl, 100µl, 250µl, 500µl, 1.0ml, 2.5ml, 5.0ml

Imprecision:

0.1% CV at 50 L to 100 L

0.05% CV at 250 µL to 12.5 mL

Inaccuracy:

1.0% at full stroke

Fluid contact:

Glass, PCTFE and Teflon

Valve/valve drive:

Valve options:

120 3-port distribution

Turn time:

250ms between adjacent ports

Drive:

Stepper motor with optical sensor for position detection

Positions:

Input, output, bypass

Materials:

Plug: virgin teflon
Body: PCTFE

Fittings:

1/4-28"-UNF screw fitting for syringe

Interface:

Type:

RS 232, RS 485 or CAN bus

Baudrate:

9.600 or 38.400, 100K or 125K (CAN bus)

Format:

Data bits: 8 parity: none
Stop bits: 1 half duplex

Addressing:

up to 15 XP/AL devices can be addressed individually

Communication:

Data terminal and OEM protocol

Firmware:

Programmable ramps, cutoffs, backlash compensation, plunger speeds, delays and loops
Arbitrarily selectable plunger speed
Clearance compensation
Absolute and relative positions
Diagnostics
Flash-PROM

Environmental:

Temperature: 15-40C
Humidity: 20-95%
Non condensing RH at: 40C

Dimensions:

Height:

127mm

Width:

44.4mm

Depth:

134.6mm